HP Vectra VL6 7 Administrator's Manual page 28

2 Installing Novell NetWare Drivers
ODI OS/2 Client Driver
8 Click on the
9 Click on the
10 The installation and changes made will not take effect until the computer is
NOTE The OS/2 ODI driver default frame type is ETHERNET_802.2. NetWare 286 and 386
servers use frame type ETHERNET_802.3 as their default but NetWare 4.0 uses both
ETHERNET_802.2 and ETHERNET_802.3 types.
28
button to open the edit window.
Edit
Edit the NET.CFG file to match the HP Ethernet Family Adapter configuration
(refer to "Sample NET.CFG File" on page 41
section for the HP Ethernet Family Adapter as shown below:
LINK DRIVER PCNTNW
BUSTYPE PCI1
FRAME ETHERNET_802.3
LED2 90
button when all the link driver parameters are correct.
SAVE
rebooted. Use the OS/2 shutdown procedure to restart the OS/2 system safely.
The installation of the OS/2 ODI driver is now complete.
English
if necessary). Create a link driver