Configuring The Hp Ethernet Family Adapter In Setup; Using Setup; Controlling The Network Security Features; Controlling The Remote Power Function - HP Vectra VL6 7 Administrator's Manual

Configuring the HP Ethernet Family Adapter in SETUP

Reconfigure the HP Ethernet Family Adapter using SETUP if you:
•
want the PC to start from the LAN server
•
want to change the remote power settings
•
want to disable the HP Ethernet Family Adapter
If you don't need to change the configuration, install the LAN drivers required
to use the PC on the LAN.

Using SETUP

You must use the PC's SETUP program to change the HP Ethernet Family Adapter
settings. You can:
•
Set the Security features
•
Control the Remote Power function
•
Enable or Disable the HP Ethernet Family Adapter.

Controlling the Network Security Features

The Security features allow you to enable starting from the network if you want the
PC to start from a LAN server.
You can also disable other boot options to prevent the PC from booting should the
network or server fail.

Controlling the Remote Power Function

The HP Ethernet Family Adapter has the ability to power up the PC upon the
receipt of a special sequence (known as a Magic Packet™) from the network.
The Remote-Wake mode allows the PC to resume (or Wake-Up) normal functioning
when it is in SLEEP (SUSPEND) mode.
The Remote-Power mode allows the PC to start when it is switched off.
1 Setting Up the Network Connection
Configuring the HP Ethernet Family Adapter in SETUP
English 11