4 Installing Other Network Drivers
NDIS 2.01 Driver with DEC PATHWORKS 5.0 Client
NDIS 2.01 Driver with DEC PATHWORKS 5.0 Client
The installation procedure for a DEC PATHWORKS 5.0 client is as follows:
1 Verify that you have DOS and at least a minimal installation of Windows on your
PC.
2 Insert your Lan Manager setup diskette in your diskette drive (for example A:),
and make that drive the current drive the active drive by typing
3 Run SETUP by typing
4 Select
Configure PC
5 Select the drive you are installing the client from:
the diskette drive, or select
PATHWORKS server.
6 Select the protocol you want to use (
7 In the adapter list, select
information:
Adapter Name = HP Ethernet Family Adapter with LAN Remote Power
NDIS driver path = A:\NDIS\DOS
NDIS driver File = PCNTND.DOS
NDIS driver Name = PCNTND$
8 Then follow the SETUP program, until the
verify that it contains the following information:
;------------------------------------;
; HP Ethernet Family Adapter ;
;------------------------------------;
DriverName = PCNTND$
BUSTYPE = PCI1
LED2
= 0x90
Make any changes if necessary and then save the file.
9 Follow the SETUP program for the rest of the installation, and refer to the
PATHWORKS Client Installation Guide if you have any difficulties.
The installation is now complete.
64
English
SETUP
.
if you want to install it from the DEC
Network
netbeui
, and fill in the blanks with the following
Other
Edit PROTOCOL.INI
A:
if you want to install it from
A:\
, for example).
screen, please