HP Vectra VL6 7 Administrator's Manual page 83

BOOTCONF.SYS File
The syntax for each Boot Image file line in the BOOTCONF.SYS file is:
Syntax
where:
MAC_address
Bootimage.sys
The last line of the BOOTCONF.SYS file should show the default value.
In this example BOOTCONF.SYS file, the last line shows the default value
DEFAULT.SYS:
where:
BIND Parameters
override the BIND time parameter of RPL.NLM
Services" on page 87
being booted.
0xMAC_address=Bootimage.sys[bind parameters]
is a string of hexadecimal digits where wildcard
characters (* and ?) can be used.
is the renamed name of a NET$DOS.SYS file,
which is associated with the MAC_address.
0x080009311265 = MYBOOTIM.SYS
0x080009?????? = HP.SYS
0x0060B0?????? = HP.SYS
0x* = DEFAULT.SYS
MYBOOTIM.SYS is a boot image particular to the workstation which has the MAC
address 080009311265.
HP.SYS is a boot image file specific to the HP Ethernet Family Adapter. HP has
two MAC address identifiers, the original 080009 and the newer 0060B0. Users
may require one or the other or both depending on when they acquired their LAN
adapters.
DEFAULT.SYS is the boot image file for all other LAN adapters.
. The bind parameters are optional parameters that allow you to
with parameters specific to a particular workstation that is
5 Configuring for Remote Boot
Setting Up a Novell NetWare 3.x and 4.x Server for Remote Start
"Loading the Remote Program Load
English 83