HP Vectra VL6 7 Administrator's Manual page 31

4 Having completed the installation, the computer must be rebooted and Windows
5 In Program Manager, double-click on the Network Setup icon in the Network
Connecting to Novell
To configure Windows for Workgroups for connection to Novell servers:
Servers Only
1 Select
2 Choose the
3 Highlight the
4 Select
5 Select
6 Select Restart Windows in the last window for all the changes to take effect.
NOTE Login to the NetWare server before starting Windows for Workgroups.
for Workgroups restarted.
It is not necessary to login or attach to a NetWare server, but the NetWare DOS
Requester must have been successfully initialized.
group to configure Windows for Workgroups networking.
To connect to Novell servers only, go to the steps given under
given under "Connecting to Novell Servers Only" on page
To connect to both Novell and Microsoft servers then go to the steps given under
refer to the steps given under "Connecting to Novell and Microsoft Servers" on
page 32.
at the Network Setup window.
Networks...
Install Windows support for the following network only
button in the Networks window.
Novell Netware (Workstation Shell 4.0 and above)
the drop-down listbox and select
in the Network Setup window.
OK
in the Windows Setup window to leave the NetWare Client software
NO
untouched.
The installation is now complete.
ODI Driver for Windows for Workgroups Clients
.
OK
2 Installing Novell NetWare Drivers
refer to the steps
31.
line in
English 31