3 How to Install Accessories In Your PC
Installing Mass Storage Devices
Installing an IDE Hard Disk Drive in the Rear Shelf
The PC has an integrated Enhanced IDE controller which supports two
Fast IDE hard disk drives.
Refer to the drive's manuals to see if you must set jumpers or if there is
a special installation procedure to follow.
1 Disconnect the computer's power supply cord.
2 Remove the computer's cover.
3 Slide the drive into the rear drive shelf, supporting the drive with
your hand.
4 Align the drive with the holes in the rear drive shelf. Then secure the
drive with the screws provided with it.
38
English