Exerpeutic 525XLR Owner's Manual page 28

MAINTENANCE & TROUBLE SHOOTING
6. PROBLEM: High Tension on all settings
a. SOLUTION: Remove the Console Cover (86) to verify that the Tension Control Knob (13)
is properly connected to the Tension Cable (93). If not, un-hook the cables and reinstall the
Tension Control Knob (13). (See Diagram Below)
b. SOLUTION: Make sure part Clip (108) is removed. (See Diagram Below)
c. SOLUTION: Turn the tension knob to tension level one, then pull the Tension Control
Knob (13) cable up as high as you can, this will reset the tension.
If you need further assistance, contact our Customer Service.
26