Table of Contents
Advertisement
ASSEMBLY
Tool:
5mm Allen Wrench with
Phillips Screwdriver
1PC
Step 3
Note: The Seat (6) has 2 sets of adjustment holes. It is recommended that users between 5'1" –
5'6" use the holes towards the rear of the Seat (6). It is recommended that users between 5'7" –
6'3" use the holes towards the front of the Seat (6).
3a Installation of Seat to the Seat Post: Align the bolt holes on the underside of the Seat (6) with
the holes on the top plate of the Seat Post (5). Attach the Seat (6) to the Seat Post (5) with three
Flat Washers (33), three Spring Washers (102) and three Hexagon Socket Bolts (58). Tighten
the bolts with the 5mm Allen Wrench provided.
Hardware:
(102) Spring Washer
(58) Hexagon Socket Bolt
(33) Flat Washer
3 PCS
3PCS
3PCS
12
Advertisement
Table of Contents
