Select [Offset Adjustment] using
3
Enter the offset value.
4
Select a digit by
value by
When a value outside the set range is entered, a short beep sounds.
Pressing
value to the factory default setting.
By pressing
During adjustment a progress bar is
displayed.
When completed, the display returns
to the measurement value display.
Span adjustment
Set the span coefficient for a measurement value.
Display the measurement value with
span-adjusted to any display value.
For 4-20 mA output ("6 4-20 mA Setting" P.15)
and alarm output ("Alarm output setting" P.17),
the adjusted values are applied.
, and press
, and press
simultaneously while entering a value resets the
or
, the value returns to the one before changing it.
.
and
.
Display value
after span
adjustment
Measurement
value
23