4
WALK TEST
Set the DIP switch 1 (LED ON/OFF) to
1
"ON".
Note>>
The switch is set "ON" by factory
default.
If the LED indication is not required at
3
all times, set the DIP switch 1 (LED
ON/OFF) to "OFF".
5
SETTING
DIP switch
1. LED ON/OFF
2. IMMUNITY
3. AUX INPUT
4. PIR AND/OR
PIR sensitivity selector
PIR 1
(Do not touch)
- 16 -
Check that the detector detects an
2
object in the intended detection area.
The installation has been successful if
the LED lights for two seconds after a
person walks into the detection area.
Detected
Note>>
For the walk test, move more than 1.0 m
(3'3") away from the detector.
PIR 2
(Do not touch)
Not detected
Anti masking
sensitibity
selector