Setting Detection Area And Sensitivity; Connection To Pc; Before Initial Setting; Lan Connection - Optex Accurance-3D A3001CB Instruction Manual

3 Setting detection area and sensitivity

3-1 Connection to PC



Before initial setting

This product is installed and configured through wired LAN (Ethernet). Separately prepare a Windows PC
and LAN cable for configuration of settings (installation). And when use two units of TOF Sensor, prepare
Ethernet hub.
In addition, use Remote Desktop Connection for settings.
<NOTE>

Please use more than transmission rate of 1G bps.

This product has been confirmed to work with Remote Desktop Connection (Windows 7).


LAN connection


In case of 1 TOF Sensor usage (One way)
LAN1
(198.168.1.250)

In case of 2 TOF Sensors usage (Two way or Two doors)
DHCP
server
LAN1
(198.168.1.250) (198.168.2.250)
DHCP client
DHCP DHCP
server server
LAN2
(198.168.2.250)
DHCP
server
LAN2
Ethernet hub
*After the initial setting, disconnect Ethernet hub.
DHCP client
Fig 3-1
DHCP client
Fig 3-2
26