Adjusting The Amount Of Froth; Making Cappuccino And Milk Based Coffees Automatically; Cleaning The Milk Container After Use; Programming The Quantity Of Coffee And Milk In The - DeLonghi ECAM45.76 Series Instructions For Use Manual

7. Place a sufficiently large cup under the coffee spouts (A7)
and the frothed milk spout (D5). Adjust the length of the
milk spout. To move it nearer the cup, simply pull it down-
wards (fig. 25);
8. Follow the instruction for use below for each function.

Adjusting the amount of froth

Turn the froth adjustment dial (D1) to adjust the amount of froth
on the milk delivered while making cappuccino and milk based
coffees.
Dial Description
position
No froth
Min. froth
Max. froth
Making cappuccino and milk based coffees
automatically
The CAFFELATTE (B4), CAPPUCCINO (B3) and LATTE MACCHIATO
(B5) buttons on the control panel (B) enable these drinks to be
prepared automatically. Proceed as follows:
1. Fill the milk container (D) and attach it as described above;
2. Turn the froth adjustment dial (D1) on the milk container
lid (D2) to the position corresponding to the required froth;
3. Press the button corresponding to the required drink.
The name of the drink selected is displayed together
with a progress bar which gradually fills as preparation
progresses;
4. After a few seconds, frothed milk is delivered from the milk
spout (D5) into the cup below. Then the machine automat-
ically makes the coffee after delivering the milk.
Preparing "MILK MENU" drinks
Besides the drinks described above, the appliance automatically
prepares MILK (hot milk), FLAT WHITE, ESPRESSO MACCHIATO
and MY MILK (customisable).
To prepare one of these drinks, simply proceed as follows:
1. Fill the milk container (D) and attach it as described above
(fig. 24);
2. Turn the froth adjustment dial (D1) on the milk container
lid (D2) to the position corresponding to the required froth;
3. Press the MILK MENU button (B6);
4. Press < (B4) or > (B8) until the drink to be programmed is
displayed (MILK, FLAT WHITE, MACCHIATO or MY MILK);
Recommended for...
CAFFELATTE/MILK (hot
milk)
LATTE MACCHIATO/
FLAT WHITE
CAPPUCCINO /
MILK (frothed milk)/ ESPRES-
SO MACCHIATO
5. Press the OK button (B12- fig. 10) to start delivery;
6. After a few seconds, frothed milk is delivered from the milk
spout (D5) into the cup below. For drinks with coffee, the
machine automatically makes the coffee after delivering
the milk.
Please note: general indications when preparing all
milk based drinks
• If you want to interrupt preparation during delivery, press
the corresponding button.
• At the end of delivery, to increase the quantity of milk or
coffee in the cup, just press and hold (within 3 seconds) the
button corresponding to the drink being made.
• Do not leave the milk container out of the refrigerator for
long periods. The warmer the milk (5°C is ideal), the poorer
the quality of froth produced.

Cleaning the milk container after use

Important! Danger of burns
When cleaning the internal tubes of the milk container (D), a lit-
tle hot water and steam leak out of the frothed milk spout (D5).
Avoid contact with splashes of water.
"SET DIAL TO CLEAN" flashes on the display each time you use a
milk function. To eliminate all milk residues, proceed as follows:
1. Leave the milk container in the machine (you do not need
to empty it);
2. Place a cup or other recipient under the frothed milk spout;
3. Turn the froth adjustment dial (D1) to "CLEAN" (fig. 26). A
progress bar appears and gradually fills as the operation
proceeds together with "Cleaning underway". Cleaning
stops automatically;
4. Turn the dial back to one of the froth selections;
5. Remove the milk container and always clean the steam
connection nozzle (A8) with a sponge (fig. 27).
Please note!
• To prepare a number of cappuccinos or milk based coffees,
clean the milk container after you have prepared the last
drink only.
• The milk container can be kept in the refrigerator.
• In some cases, to clean you must wait for the appliance to
heat up.
Programming the quantity of coffee and milk
in the cup for the CAFFELATTE, CAPPUCCINO and
LATTE MACCHIATO buttons
The appliance is set by default to automatically deliver standard
quantities. To change these quantities, proceed as follows:
1. Place a cup under the coffee spouts (A7) and milk spout
(D5);
15