Accessing Voice Messages - Cisco 7937G Manual

Accessing Voice Messages

To access voice messages, use the Msgs softkey.
Note Your company determines the voice message service that the Cisco Unified IP
Conference Station 7937G system uses. For the most accurate and detailed information, refer
to the documentation that came with your voice message service.
If you want to...
Set up and personalize
your voice message
service
See if you have a new
voice message
Listen to your voice
messages, or access the
voice messages menu
Send a call to your
voice message system
36
Then...
Press the Msgs softkey, and then follow the Integrated Voice Response
instructions. If a menu appears on your display screen, choose the
appropriate menu item.
Look for these visual and audible alerts:
• Red LED indicators on the conference station
• Stutter dial tone when you place a call
To configure message indicators, see
Indicators, page 29.
Press the Msgs softkey.
Depending on your voice message service, doing so either auto-dials the
message service or provides a menu on your display screen.
Press the iDivert softkey.
The iDivert feature automatically transfers a call (including a ringing or
held call) to your voice message system. Callers hear your voice message
greeting and can leave you a message.
Customizing Rings and Message
OL-11559-02