Answering a Call
You can answer a call by simply pressing the Off-hook button, or you can use other options if they are
available on the conference station.
If you want to...
Switch from a connected
call to answer a new call
Answer a call on hold
Send a call to your voice
messaging system
Auto-connect calls
Retrieve a parked call on
another conference
station
Use the conference station
to answer a call ringing
elsewhere
Ending a Call
There are two ways to end a call.
If you want to...
Hang up your current call
Hang up one call, but preserve another
call on the same line
Using Hold and Resume
You can hold and resume calls.
If you want to...
Put a call on hold
Remove a call from hold
Cisco Unified IP Conference Station 7937G Phone Guide for Cisco Unified Communications Manager 6.0
Then...
Press Answer
Highlight the appropriate call, and then
press Resume
Press iDivert
Use AutoAnswer
Use Call Park
Use Call Pickup
Then...
Press
Press EndCall. If necessary, remove the call from hold first.
Then...
1. Make sure the call you want to put on hold is highlighted.
2. Press Hold.
1. Make sure the appropriate call is highlighted.
2. Press Resume.
For more information, see...
Using Hold and Resume,
page 17
Using Hold and Resume,
page 17
Accessing Voice Messages,
page 36
Using AutoAnswer, page 28
Storing and Retrieving Parked
Calls, page 25
Picking Up a Redirected Call
on Your Conference Station,
page 24
or EndCall.
17