Usb Configuration - Avalue Technology ESM-EHLC User Manual

ESM-EHLC User's Manual
SATA Device Type
SATA Port 1 DevSlp

3.6.3.2.3 USB Configuration

Item
XHCI Compliance Mode
USB3 Link Speed Selection
USB Port Disable Override
70 ESM-EHLC User's Manual
Hard Disk Drive
Solid State Drive[Default]
Enabled
Disabled[Default]
Option
Option to enable Compliance Mode. Default is to
Disabled[Default]
disable Compliance Mode. Change to enabled for
Enabled
Compliance Mode testing.
GEN1 This option is to select USB3 Link Speed GEN1 or
GEN2[Default] GEN2.
Selectively Enable/Disable the corresponding USB
Disabled[Default]
port from reporting a Device Connection to the
Select Per-Pin
controller.
Identify the SATA port is connected to Solid
State Drive or Hard Disk Drive.
Enable/Disable SATA Port 0 DevSlp. For
DevSlp to work, both hard drive and SATA
port need to support DevSlp function,
otherwise an unexpected behaviour might
happen. Please check board design before
enabling it.
Description