Mode Selection - Lutron Electronics WA-2017SD Operation Manual

4. MODE SELECTION

1) Turn on the meter by pressing the " Power Button "
( 3-2, Fig. 1 ) momentarily.
Pressing the " Power Button " ( 3-2, Fig. 1 )
*
continuously and > 2 seconds again will turn off the
meter.
2) The meter can select 4 kind Mode as :
a. pH, mV ( ORP ) measurement
b. Dissolved Oxygen measurement
c. Conductivity, TDS measurement
d. Salt measurement
Pressing the " Mode Button " ( 3-5, Fig. 1 ) once, the
Display will show the following text in sequence :
PH pH, mV ( ORP ) measurement
do Dissolved Oxygen measurement
Cd Conductivity, TDS measurement
SALt Salt measurement
Until the Display show the desired mode the meter will
execute this Mode with default.
12