Measuring Procedure; Function Selection - Lutron Electronics EMC-9400SD Operation Manual

4. MEASURING PROCEDURE

4-1 Function selection

1) Turn on the meter by pressing the " Power Button "
( 3-2, Fig. 1 ) momentarily.
Pressing the " Power Button " ( 3-2, Fig. 1 )
*
continuously and > 2 seconds again will turn off the
meter.
2)
The meter Simultaneously can measurement five function screen.
a. Humidity/Temp + Air velocity/Temp. + Light meter
+ K or J Thermometer
b. Humidity + Temp + DEW + WET
c. Air velocity + Temp + FLOW
d. Light meter
e. Type K or J Thermometer
Pressing the " Function Button " ( 3-6, Fig. 1 )
continuously ( not release the button ), the Display
will show the following text in sequence :
(RH/Temp+AM/Temp+LUX+K)-->(RH+Temp+DEW+WET)--->
(AM+Temp+FLOW)--->(LUX)--->(K or J Thermometer)
when the screen show the desired Function ,
just release the " Function Button " ( 3-6, Fig. 1 ), the meter will
show this function measure screen with default.
*Although select single function measure screen, but other
function measure , still being executed.
9