Lutron Electronics WA-2017SD Operation Manual page 48

tdS - TDS ( PPM )
Cd - Conductivity ( uS, mS )
2) Use the "
▲
( 3-6, Fig. 1 ) to select the upper text to " Cd " or " tdS ".
then press the " Enter Button " ( 3-4, Fig. 1 ) will save
the setting function with default.
12-13 Set pH manual Temp. compensation value
When the lower display show " t-SEt "
1) This function only for the pH measurement of
adjusting the pH electrode's manual Temp.compensation
value. The default value is 25
2) Use the "
▲
( 3-6, Fig. 1 ) to select the upper value to the desired
Temp. compensation value (
" Enter Button " ( 3-4, Fig. 1 ) will save the setting
value with default.
12-14 ESC
When the display show " ESC "
When the Display show the text " ESC ", then press the
" ESC Button " ( 3-3, Fig. 1 ) will finish the Advanced
Setting procedures and return to the normal measuring
screen.
Remark :
During execute the " Advanced Setting " function,
if press " ESC Button " ( 3-3, Fig. 1 ) will exit the
" Advanced Setting " function, the LCD will return
to normal screen.
Button " ( 3-5, Fig. 1 ) or "
Button " ( 3-5, Fig. 1 ) or "
46
▼
( 77 ).
℃ ℉
▼
or ), then press the
℃ ℉
Button "
Button "