Electrical Specifications - Haier GE DDT700S N0 Series Technical Service Manual

AC Voltage
• Circulation Pump: 120 VAC, .8 amps – 3.8
LRA (Locked Rotor Amps), 8GPM @ 5PSI
• Drain Pump: 120 VAC, .3-5 ohms, .65 amps,
~70 second cycle
• Tub TCO: 120 VAC, 210°F +/- 10°F Manual
Reset
• Main Control: Input 120 VAC, Output 120
VAC, and Output 5 and 13.5 VDC
• Heater
Heater 120 VAC
Wet
Watts 800
Ohms 18
14.5 (Room Temp)
Amps
6.67
DC Voltage
• Turbidity Sensor: 5 VDC to LED, 10k ohms
Thermistor Specifications
(in Turbidity Sensor)
Resistance Temperature
20k
11k
5.8k
3.4k
2.1k
1.3k

Electrical Specifications

Dry
500 +/- 5%
26.8 (hot) +/- 5%
4.17 +/- 5%
50°F
75°F
100°F
125°F
150°F
175°F
DC Voltage (continued)
• Door Switch: 13.5 VDC
• Water Valve: 13.5 VDC, 32 ohms, .83 GPM,
~1-minute cycle time
• User Interface (UI) Control: 13.5 VDC (some
models have 13.5 VDC output to detergent
module)
• Power Dry Fan: 12 - 13.5 VDC, 6,000 RPM
• Detergent Cup: 13.5 VDC, 25 ohms, 1
second to release detergent cup
• Rinse Aid Dispenser: 15 seconds to release
rinse aid, capacity 100 ml
• Pressure Switch:
0 - 5VDC Freq.
Output (Hz)
44.27 - 43.94
40.77 - 40.44
40.11 - 39.69
39.61 - 39.12
– 9 –
Internal Water Level
Description
Dry
Typical Fill
Flood Trip Point - Drain
Pump Runs
Water Over Tub Lip