Fill Funnel and Hose
The Fill Funnel is located on the left side of the
dishwasher tub and must be removed from
installation to gain access. Remove by turning
the mounting nut counter-clockwise from inside
the tub.
The fill funnel may now be removed from the
outside of the tub. There is a gasket between
the fill funnel and tub. The fill hose connects the
water valve to the fill funnel.
Gasket
Fill Funnel
Fill Valve
Water Valve Removal
1. Remove power to the dishwasher.
2. Remove the toe kick.
3. Remove two 1/4-in. hex-head screws from the
bracket to the leg assembly.
4. Slide the bracket off of the leg.
5. Remove the wire harness.
6. Remove the fill hose by using pliers to
remove tension on the spring clamp.
Fill Hose
– 53 –
Spring Clamp
Need help?
Do you have a question about the GE DDT700S N0 Series and is the answer not in the manual?
Questions and answers