GE Factory Service Employees are required to use safety glasses with side shields, safety gloves and
steel toe shoes for all repairs.
Brazing Glasses
Dyneema®Cut Resistant
Glove
Prior to disassembly of the dishwasher to access components, GE
Factory Service technicians are REQUIRED to follow the Lockout /
Step 1
Plan and Prepare
Step 2
Shut down the appliance
Step 3
Isolate the appliance
Safety Requirements
Plano Type Safety Glasses
Cut Resistant Sleeve(s)
Steel Toed Work Boot
Tagout (LOTO) 6 Step Process:
Step 4
Apply LOTO device and lock
Step 5
Control (discharge) stored
energy
Step 6
"Try It" verify that the appliance
is locked out
– 6 –
Prescription Safety Glasses
Safety Glasses must be
ANSI Z87.1-2003 compliant
Electrically Rated Glove and
Dyneema® Cut Resistant Glove
Keeper
Need help?
Do you have a question about the GE DDT700S N0 Series and is the answer not in the manual?
Questions and answers