Haier GE DDT700S N0 Series Technical Service Manual page 72

Drain Pump Removal or Replacement
1. Remove power to the dishwasher.
2. Remove the door (see Door Removal, under
Door, in the Tub and Structure section of
this service guide).
3. Remove the sump assembly (see Sump
Module Removal, under Sump Module in
the Tub and Structure section of this service
guide).
4. Press in on the locking tab.
5. Rotate the pump assembly counter clockwise
(as viewed from the front of the pump) to
remove.
6. Pull out on the pump to finish removal.
– 72 –