English ( Original Instructions ) - Luna BSM 2500 Original Instructions Manual

ENGLISH
original instructions
ImPorTANT!
rEaD ThE iNSTrucTiONS carEfuLLy,
aND TaKE yOu TO
iNfOrmaTiON.
uSE ThE maNuaL TO famiLiari-
zE yOurSELf wiTh ThE machiNE-
ry, hOw iT iS uSED cOrrEcTLy aND
SafETy.
WarnIng!
FOr YOUr OWn SaFETY rEaD InSTrUCTIOn
ManUaL BEFOrE OPEraTIng SanDEr.
1. Wear eye protection.
2. Support workpiece with backstop or workable.
1. KEEP gUarDS In PLaCE anD In WOrKIng
OrDEr.
2. rEMOVE aDJUSTIng
WrEnCHES from habit of checking to see that
keys and adjusting wrenches are removed from
tool before turning it on.
3. KEEP WOrK arEa CLEan. Cluttered areas
and benches invite accidents.
4. DOn'T USE
EnVIrOnMEnT. Don't use power tools in
damp or wet locations, or expose them to rain.
Keep work area well lighted.
5. KEEP CHILDrEn aWaY. all vistors should be
kept safe distance from work area.
6. MaKE WOrKSHOP KID PrOOF with
padloacks,master switches, or by removing star-
ter keys.
7. DOn'T FOrCE TOOL. It will do the job better
and safer at the rate for which it was designed.
8. USE rIgHT TOL. Don't force tool or attachment
to do a job for which it was not designed.
9. WEar PrOPEr aPParEL. Wear no loose clo-
thing, gloves, neckties, rings, bracelets, or other
jewerly which may get caught in moving parts.
nonslip footwear is recommended. Wear protec-
tive hair covering to contain long hair. Exception
: The reference to gloves may be omitted from the
instructions for a grinder.
10. aLWaYS USE SaFETY gLaSSES.also use
face or dust mask if cutting operation is dusty.
KEYS anD
In DangErOUS
Everyday eyeglasses only have impact resistant
lenses, they are nOT safety glasses.
11. SECUrE WOrK. Use clamps or a vise to hold
work when practical. It's after than using your
hand and frees both hands to operate tool.
12. DOn'T OVErrEaCH. Keep prooer footing and
balance at all time.
13. MaInTaIn TOOLES WITH CarE. Keep tools
sharp and clean for best and safest performance.
Follow instructions for lubricating and changing
accessories.
14. DISCOnnECT TOOLS BEFOrE SErVIng;
when changing accessories, such as blades, bits,
cutters, and the like.
15. rEDUCE THE rISK OF UnInTEnTIOnaL
STarTIng. Make sure switch is in off position
before pluggubg in.
16. USE rECOMMEnDED
Consult the owener's manual for recommended
accessories. The use of improper accessories may
cause risk of injury to person.
17. nEVEr STanD On TOOL. Serious injury
could occur if the tool is tipped or if the cutting
tool is unintentionally contacted.
18. CHECK DaMagED ParTS. Before futher use
of the tool, a guard or other part that is damaged
should be care fully checked to determine that it
will operate property and perform its intended
function-check for alignment of moving parts,
binding of moving parts, breakage of parts,
mounting, and any other conditions that may
affect its operation. a guard or other part that is
damaged should be properly repaired or replaced.
19. DIrECTIOn OF FEED. Feed work into a blade or
cutter against the direction of rotation of the balde
or cutter only.
20. nEVEr LEaVE TOOL. running unattended turn
power off. Don't leave tool until it comes to a
complete stop.
25
aCCESSOrIES.