Removing And Replacing The Airflow Guide - HP Kayak XM600 Hardware Replacement Manual
Hp kayak xm600: install guide
Hide thumbs
Also See for Kayak XM600:
- User manual (98 pages) ,
- Troubleshooting manual (49 pages) ,
- Administration manual (44 pages)
Table of Contents
Advertisement
Installing and Replacing Hardware Parts in Your PC Workstation
Removing and Replacing the Airflow Guide
Removing the HP
UltraFlow Airflow
Guide
Replacing the HP
UltraFlow Airflow
Guide
Removing and Replacing the Airflow Guide
1
Switch off the display and PC Workstation. Disconnect all power cables
and any LAN or telecommunications cables.
2
Remove the PC Workstation's cover (refer to page 2 for instructions).
3
Slide the HP UltraFlow Airflow Guide towards the front access shelf.
4
Lift the HP UltraFlow Airflow Guide upwards to remove it from the PC
Workstation's case.
1
Lower the HP UltraFlow Airflow Guide.
2
Slide the HP UltraFlow Airflow Guide towards the processor fan until it
clicks into place.
3
Replace the PC Workstation's cover (refer to page 3). Reconnect all the
power and telecommunications cables.
4
Advertisement
Table of Contents
