HP Kayak XU800 Installing And Replacing Hardware Manual page 38

Installing and Replacing Hardware Parts in Your PC Workstation
Replacing the Fan and Speaker Assembly
Replacing the Fan
and Speaker
Assembly
1 Place the fan and speaker assembly behind the internal shelves (the
speaker should be near the bottom edge of the chassis and facing
towards the front of the PC Workstation). Ensure all cables are clear of
the assembly, then carefully move the fan and speaker assembly towards
the front of the chassis.
2 Align the clips and guide pins with their appropriate sockets and slide
the assembly forward to secure it into place.
3 Connect the fan and speaker cables to their connectors located on the
system board.
4 For HP Kayak XU800 PC Workstations, replace the Memory Expansion
Card and secure it in place with the retaining screw. If required, refer to
page 14 for instructions.
5 Replace the screw on the front of the chassis.
6 Replace the retaining bar and secure it in place with the retaining screw.
7 Return the PC Workstation to its upright position.
8 Replace the front upper and lower bezels and PC Workstation's cover
(refer to page 4). Reconnect all the power and telecommunications
cables.
38