14 INSTALLATION REGULATIONS
Both the electric and water installation must follow and meet the requirements
and regulations relevant in the country of use!
15 CONTROL PANEL
15.1 CONTROL PANEL DESCRIPTION
An example of the LITE front panel can be seen in Figure 2. This panel is most often designed in two versions,
either horizontal (shown in the figure) or vertical.
There are several indication symbols defining the operating modes of the heater or information or error
values. Also, some of the symbols are used as capacitive touch buttons for control. The description and the
meaning of each one is described below.
15.2 LITE THERMOSTAT FRONT PANEL
ICON
NAME
1
Switch
2
Optimum
3
Thermometer
4
Controller
5
Logo
Figure 2
FUNCTION DESCRIPTION
Heater On / Off
Setting of the optimal temperature
Display of the current / set temperature and error codes
Setting of the heater temperature
Active heater indication
Table 4
- 13 -