11 FUNCTIONAL DEFECTS
DEFECT
1
Water in the tank is cold
Water in the tank is not warm
2
enough
3
Water in the tank is cold
Water temperature in the tank
4
does not correspond with value
set
Do not try to repair the failure yourselves! Seek either expert or service help. It does not take
much for an expert to remove the defect. When making a repair appointment, report the type
and serial number you find on the performance plate of your water heater.
12 FIRE-FIGHTING
INSTALLATION AND USE OF HEATER
We would like to emphasise that the heater must not be connected to power supply if work
involving flammable liquids (petrol, spot remover) or gases, etc., is performed nearby.
• LED is on
• heating element failure
• LED is on
• heating element failure
• operating thermostat failure safety
• LED is not on
• power supply outside the heater
• thermostat failure
Table 3
REGULATIONS
FAILURE
thermostat shut off power supply
discontinued
- 11 -
FOR