Table of Contents
Advertisement
10 IMPORTANT NOTICE
- Without a confirmation issued by an authorised company about performed electrical
and plumbing fixture the warranty certificate shall be void.
- The hot water outlet must be equipped with a combination faucet.
- It is not allowed to handle the thermostat in any manner whatsoever, aside from
temperature resetting with a control button.
- All electric installation handling, adjustment and replacement of the regulation elements
shall only be performed by an authorised service company.
- The thermal fuse must not be turned off! The non-reversible thermal fuse discontinues
electric power input to the heating element should the thermostat fail, if the water
temperature in the heater exceeds 99 °C.
If the water heater is mounted in enclosed areas, inter-ceilings, built-in structures and recesses, ensure
sufficient access to service fittings, electrical terminal boards, anodes and manholes. Minimum spacing from
manhole is 200 mm.
10.1 DISPOSAL OF PACKAGING MATERIAL AND FUNCTIONLESS
PRODUCT
A service fee for providing return and recovery of packaging material has been
paid for the packaging in which the water heater was delivered. Was paid
pursuant to Act No. 477/2001 Coll., as amended, at EKO-KOM a.s. The client
number of the company is F06020274. Take the product packages to a waste
disposal place designated to that purpose by the municipality. When the
operation terminates, disassemble and transport the discarded and unserviceable
heater to a waste recycling centre (collecting yard), or contact the manufacturer.
- 10 -
Advertisement
Table of Contents
