Install The Smps Unit Of An Slite Tile - Barco SLite Service Manual

3. Release the 7 torx head screws.
Image 7-25
4. Pull out the SMPS unit from the SMPS assembly.

7.14 Install the SMPS unit of an SLite tile

Necessary tools
• Nut driver 7 mm
• Torx driver T20
How to install the SMPS unit of an SLite tile ?
1. Line up the fixation holes of the SMPS unit with threaded mounting holes on the SMPS frame.
2. Fasten the SMPS unit with 7 torx headed screws, using a T20 torx driver.
3. Plug in the mains power cord on the SMPS unit.
Image 7-26
Mains power cord plugged in.
4. Place the SMPS cover on the SMPS assembly.
5. Fasten the SMPS cover with four M4 nuts, using a 7 mm nut driver.
R5976621 SLITE DISPLAY 02/09/2005
7. SLite servicing procedures
41