Barco SLite Service Manual page 24

5. On Screen Display messages
OSD Description
message
Displaying the start pixel column and end pixel column of the tile in the complete LED-wall. The origin is
VPOS
always left top of the display.
146
The vertical window position can be displayed on request via the XLite toolset.
→
194
Displaying the total run time of the tile in hours.
RUN
The total run time of a tile can be displayed on request via the XLite toolset.
TIME
71
H.
Run time exceeds 99.999 hours. (Buy a new LED-wall).
RUN
TIME
99999
Displaying the serial number of the tile.
SER.
The serial number of the tile can be displayed on request via the XLite toolset.
NR.
0126
4529
Displaying PWM-repeat value and MA-clock value of the tile. PWM-R is factory pre-adjusted.
PWM-R
This message can be displayed on request via the XLite toolset.
6
MA-CL
60
Displaying status re-sync unit: re-sync unit works properly and sync signal is detected.
SYNC
The status of the re-sync unit can be displayed on request via the XLite toolset.
OK
Displaying status re-sync unit: re-sync unit works properly but no sync signal is detected.
NO
The status of the re-sync unit can be displayed on request via the XLite toolset.
SYNC
Displaying status re-sync unit: malfunction re-sync unit.
RESYN
The status of the re-sync unit can be displayed on request via the XLite toolset.
NOT
OK
I C error while reading status re-sync unit or re-sync unit does not support this feature (older re-sync units).
2
NO
The status of the re-sync unit can be displayed on request via the XLite toolset.
RESYN
FOUND
Displaying status external fan: external fan is on.
EXT
The status of the external fan can be displayed on request via the XLite toolset.
FAN
ON
Displaying status external fan: external fan is off.
EXT
The status of the external fan can be displayed on request via the XLite toolset.
FAN
OFF
Displaying the current RS232 speed which value is set to 19200 baud.
RS232
The baud rate can be displayed on request via the XLite toolset.
SPEED
19200
baud
Displaying the current RS232 speed which value is set to 38400 baud.
RS232
The baud rate can be displayed on request via the XLite toolset.
SPEED
38400
baud
20 R5976621 SLITE DISPLAY 02/09/2005