Barco SLite Service Manual page 25

OSD Description
message
Displaying the current RS232 speed which value is set to 57600 baud.
RS232
The baud rate can be displayed on request via the XLite toolset.
SPEED
57600
baud
Displaying the current RS232 speed which value is set to 115,2 kilo baud.
RS232
The baud rate can be displayed on request via the XLite toolset.
SPEED
115.2
Kbaud
Displaying detected measurement systems: All tiles use measurement system 10.
MEAS
This message can be displayed on request via the XLite toolset.
SYST
ALL
10
Displaying detected measurement systems: Different measurement system detected. Displaying minimum
MEAS
and maximum measurement system.
SYST
The minimum and maximum measurement systems can be displayed on request via the XLite toolset.
15-
17
Both calibration corrections, luma (white balance) and color (RGB), are disabled.
ALL
This message is displayed each time the tile starts up and all calibrations are set to disabled.
CALI
DISA-
BLED
Color (RGB) calibration correction is disabled.
COLOR
This message is displayed each time the tile starts up and only the color calibration is set to disabled.
CALI
DISA-
BLED
Color calibration correction does not exist.
COLOR
This message is displayed each time the tile starts up and all calibrations are set to enabled, but no correction
CALI
values are found for color calibration.
DON'T
EXIST
Displaying calibration status: Only luma (white balance) correction enabled
CALI
Calibration status can be displayed on request via the XLite toolset.
ONLY
LUMA
Displaying calibration status: Both corrections, luma (white balance) and color (RGB), are enabled. But
CALI
no correction values are found for color calibration.
LUMA
Calibration status can be displayed on request via the XLite toolset.
NOCOL
EXIST
Displaying calibration status: Both calibration corrections, luma (white balance) and color (RGB), are disabled.
CALI
Calibration status can be displayed on request via the XLite toolset.
DISA-
BLED
Displaying calibration status: Both corrections, luma (white balance) and color (RGB), are enabled. The color
CALI
corrections are calculated with the LED-board measurements.
FULL
Calibration status can be displayed on request via the XLite toolset.
LEDB.
BASED
R5976621 SLITE DISPLAY 02/09/2005
5. On Screen Display messages
21