Removing The Expansion Board Assembly - Compaq Deskpro AP500 Reference Manual

6-8 Hardware Upgrade Preparations
Removing the Expansion Board
Assembly
To remove the expansion board assembly:
1. Turn off the workstation and disconnect the power cord from the
grounded AC outlet and the back of the workstation.
2. Remove the side access panel.
3. Refer to the following illustration to remove the expansion board
assembly.
Figure 6-4. Removing the expansion board assembly
4. Reassemble the workstation, and connect the power cord to the
grounded AC outlet and to the workstation.
IMPORTANT: After connecting the power cord to the grounded AC outlet
and to the workstation, DO NOT turn the power button on if the Power LED is
a steady amber color. A steady amber color indicates that the expansion
board assembly is not seated properly. Disconnect the power cord and reseat
the expansion board assembly.
IMPORTANT: When replacing the side access panel, be sure to tighten all
four thumbscrews.
Writer: Jeff Parmenter Project: Compaq Professional Workstation AP500 Reference Guide Comments: 338521-002
File Name: G-CH06.DOC Last Saved On: 2/11/99 8:24 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED