Quicklock/Quickblank - Compaq Deskpro AP500 Reference Manual

3-16 Intelligent Manageability

QuickLock/QuickBlank

QuickLock/QuickBlank disables the keyboard and mouse interface, and can
blank the screen, without exiting open applications.
IMPORTANT: You must set a Power-on Password before you can enable
QuickLock or QuickBlank. For more information, see the section
"Establishing a Power-on Password Using Computer Setup" in this chapter.
Enabling QuickLock and QuickBlank
1. Turn on or restart the workstation.
2. When you see the words "F10=Setup" in the bottom-right corner of the
screen, press the F10 key.
NOTE: If you do not press the F10 key while the message is displayed, you
must turn the workstation off, then on again, to access the utility.
3. Press the Enter key to bypass the welcome screens and display the
Compaq Utilities menu.
4. From the Compaq Utilities menu, select Computer Setup, then press the
Enter key.
5. In the Computer Setup window, click Built-in Devices.
6. In the Built-in Devices window, click Security Management.
7. Under Power-on Password, select Enable QuickLock of the Keyboard,
then select QuickBlank the screen when locked and/or Initiate
QuickLock when entering Energy Saver mode.
NOTE: In order to use Initiate QuickLock when entering Energy Saver mode,
the Power Management option must be enabled.
8. Save the configuration and exit the utility.
9. Restart the workstation.
For more information about the various screen and configuration options, see
Chapter 2.
Writer: Jeff Parmenter Project: Compaq Professional Workstation AP500 Reference Guide Comments: 338521-002
File Name: D-CH03.DOC Last Saved On: 2/11/99 8:20 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED