Compaq Deskpro AP500 Reference Manual page 92

7-4 Memory Upgrades
To install a memory module:
1. Turn off the workstation and disconnect the power cord from the
grounded AC outlet and the back of the workstation.
2. Remove the side access panel.
3. Remove the AGP graphics controller, if necessary.
4. Refer to the following illustration to install a DIMM module.
Figure 7-2. Installing a DIMM module
To remove a memory module, reverse the above procedure.
Writer: Jeff Parmenter Project: Compaq Professional Workstation AP500 Reference Guide Comments: 338521-002
2
1
File Name: H-CH07.DOC Last Saved On: 12/14/98 12:06 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
2