Compaq Deskpro AP500 Reference Manual page 52
Hp deskpro ap500: reference guide
Hide thumbs
Also See for Deskpro AP500:
- Maintenance and service manual (9 pages) ,
- Supplementary manual (21 pages)
Table of Contents
Advertisement
3-14
Intelligent Manageability
4.
Reassemble the workstation and reconnect the power cord to the electrical
wall outlet and to the power connector on the rear of the workstation.
5.
Turn on the workstation.
IMPORTANT: Clearing the Power-on Password will also clear the Setup
Password. Be sure to reestablish your Setup Password after clearing the
Power-on Password.
6.
Turn off the workstation once more. Disconnect the power cord from the
grounded AC outlet and from the power connector on the rear of the
workstation.
7.
Remove the side access panel and the expansion board assembly to
access SW1 on the system board.
8.
Return switch 1 to its original default (OFF) position.
9.
Establish a new Power-on Password, if desired.
10. Reassemble and restart the workstation.
Writer: Jeff Parmenter Project: Compaq Professional Workstation AP500 Reference Guide Comments: 338521-002
File Name: D-CH03.DOC Last Saved On: 2/11/99 8:20 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Advertisement
Table of Contents
Troubleshooting
