Installing An Additional Pentium Iii Processor - Compaq Deskpro AP500 Reference Manual

10-4 Processors
Installing an Additional Pentium III
Processor
You can upgrade the workstation to a multi-processor system by installing a
Pentium III processor of the same speed, cache size, and type in the second
processor slot.
To install a second Pentium III processor:
1. Turn off the workstation and disconnect the power cord from the
grounded AC outlet and the back of the workstation.
2. Remove the following components:
Writer: Jeff Parmenter Project: Compaq Professional Workstation AP500 Reference Guide Comments: 338521-002
WARNING: To reduce the risk of personal injury from hot
surfaces, allow the internal system components to cool before
touching.
CAUTION: Installing the processor incorrectly may cause damage
to the system board. Compaq recommends that you have a
Compaq authorized reseller or service provider install the
processor. If you plan to install it yourself, read all the instructions
carefully before you begin.
side access panel
expansion board assembly
File Name: K-CH10.DOC Last Saved On: 1/26/99 3:06 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED