Sun Microsystems Fire V1280 Product Notes
Hide thumbs
Also See for Fire V1280:
- Service manual (182 pages) ,
- Site preparation and installation manual (106 pages) ,
- Installation manual (64 pages)
Related Manuals for Sun Microsystems Fire V1280
Summary of Contents for Sun Microsystems Fire V1280
- Page 1 Sun Fire V1280/Netra 1280 ™ ™ Systems Product Notes Sun Microsystems, Inc. www.sun.com Part No. 817-5342-10 March 2004, Revision A Submit comments about this document at: http://www.sun.com/hwdocs/feedback...
- Page 2 Copyright 2004 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, Californie 95054, Etats-Unis. Tous droits réservés. Sun Microsystems, Inc. a les droits de propriété intellectuels relatants à la technologie qui est décrit dans ce document. En particulier, et sans la limitation, ces droits de propriété...
- Page 3 Sun Fire V1280/Netra 1280 ™ ™ Systems Product Notes The following topics are included in this product note: “Locking Nuts” on page 1 “Using the Shipping Cradle to Move a System Between Cabinets” on page 2 Locking Nuts Locking nuts and retention washers are currently installed on the right and left slides when the systems ship installed in a cabinet.
- Page 4 Using the Shipping Cradle to Move a System Between Cabinets When shipped from the factory, a Sun Fire V1280/Netra 1280 system is mounted on an orange metal shipping cradle. If it is necessary to move a system from one cabinet to another, reuse the shipping cradle during the move.
- Page 5 Slide cutout Guide post Shipping Cradle Details FIGURE 2 b. Raise the handle so that the tops of the front and rear guide posts fit into entry holes in the cutouts. The grooves in the guide posts fit into the narrow slots in the cutouts. c.
- Page 6 Lift the door off the hinge pins and store the door in a safe place. c. Repeat Step a and Step b for the second front bezel door. 7. For a Sun Fire V1280 system, loosen the captive screws that hold the front of the system to the cabinet.
- Page 7 9. Pull the Sun Fire V1280/Netra 1280 system out of the cabinet until the slides lock into the fully extended position. 10. Raise the shipping cradle up to the system ( ). Orient the front of the FIGURE 4 shipping cradle with the front of the system.
- Page 8 There are two lock buttons (green and silver) on each rail assembly. Use the silver button(s) for this step. The green buttons are for sliding the system back into the cabinet. Sun Fire V1280/Netra 1280 Systems Product Notes • March 2004...
- Page 9 Rail assembly Lock button Inner slide Unlocking an Inner Slide Button FIGURE 6 14. Remove the rail assemblies from the old cabinet and install them in the new cabinet. There are two screws on the front of each rail assembly and two screws on the back. For the mounting hole numbers to use in the new cabinet, refer to the system installation guide for your system.
-
Page 10: Accessing Sun Documentation
Please include the title and part number of your document with your feedback: Sun Fire V1280/Netra 1280 Systems Product Notes, part number 817-5342-10 Sun Fire V1280/Netra 1280 Systems Product Notes • March 2004...
Need help?
Do you have a question about the Fire V1280 and is the answer not in the manual?
Questions and answers