Adjusting Salt Consumption - Sandstrom SID60W14N Installation Instructions Manual

Adjusting Salt Consumption

Salt consumption must be adjusted to correspond to the water hardness level in your area. If you don't
know how hard the water in your home is, please ask the company that supplies water in your area.
It is recommended that adjustments should be made in accordance with the following chart.
GB
German ˚dh
0-5
6-11
12-17
18-22
23-34
35-55
1˚dh (German degree) = 0.178 mmol/l
1˚fh (French degree) = 0.099 mmol/l
1˚Clark (British degree) = 0.142 mmol/l
To optimise your dishwasher for the local water hardness, please follow the steps below and refer to the
above table.
1. Press the
2. Press and hold the P program button for 5 seconds until the salt refill warning indicator will be on
periodically.
3. Press the P program repeatedly to adjust the water hardness level: H1 / H2 / H3 / H4 / H5 / H6.
4. After adjusting the water hardness level, press the
32
Water Hardness
French ˚fh British ˚Clarke
0-9 0-6
10-20 7-14
21-30 15-21
31-40 22-28
41-60 29-42
61-98 43-69
On/Off button to switch on the dishwasher.
Selector Position
mmol/l
0-0.94 H1
1.0-2.0 H2
2.1-3.0 H3
3.1-4.0 H4
4.1-6.0 H5
6.1-9.8 H6
• Do not use everyday table salt or cooking salt as
they contain insoluble substances which could
damage the dishwasher.
• Do not pour detergent into the salt container.
This will damage the dishwasher.
On/Off button to save the setting.
Salt Consumption
(Gram/Cycle)
0
9
12
20
30
60