Dns - ADTRAN SMART/RG SR905ac User Manual

Field Name Description
Target Enter the host IP or network address. Enter specific IP addresses for a single device or identify an entire subnet.
e.g., enter 192.168.1.0 to identify that subnet as the target.
Netmask (Appears for IPv4 routes only) Enter the net mask for the target IP address.
Gateway Enter the gateway address for the route.
Metric Enter the number of hops needed to reach the default gateway. The default is 0.

DNS

On this page, you can configure network DNS servers.
1. In the left menu, click
2. To add a custom DNS server:
a. Click the Add server
b. Enter the IP address of the custom DNS server.
c. Click Save changes.
d. To add another IP address, repeat steps a - c.
3. To change a DNS server address:
a. Click the Edit
b. Enter the new server address
c. Click Save Changes
SmartRG Inc., an Adtran company. Proprietary and Confidential. All Rights Reserved. © 2020
Network > Routing > DNS. The following page appears.
button. The Add/Edit DNS Server
( ) icon next to it. The Add/Edit dialog box appears.
to commit your changes.
dialog box appears.
50