Internet; Dhcp For Ipv4 Wans - ADTRAN SMART/RG SR905ac User Manual

Internet

1. When you select Network
displayed.
2. By default, the Internet Service
3. Configure the tagging options:
a. In the Tag mode
DQTagged. The default is Untagged.
b. If Tagged or DQTagged is selected, the
values are 1 - 4079. The default is 2. Enter the P-bit type. Options are 0 - 7. The default is 0.
c. If DQTagged is selected, the
will be accepted and mapped to the specified WAN. Valid values are 1 - 4062. The default is 0.
4. (Optional) In the MAC Address
gateway MAC address.
5. Complete the fields for
information provided below.
a. In the Configuration method
Options for IPv4 WANs are DHCP, Static Address, and PPPoE. The default is DHCP.
Options for IPv6 WANs are DHCPv6, Static Address, and None. The default is DHCPv6.
b. Complete the remaining fields as instructed below for each option:
"DHCP for IPv4 WANs" (IPoE)
l
"Static Address for IPv4 WANs"
l
"PPPoE for IPv4 WANs"
l
"DHCPv6 for IPv6 WANs"
l
"Static Address for IPv6 WANs"
l
6. Click the Apply button in the

DHCP for IPv4 WANs

The following fields appear when DHCP is selected as the configuration method. This method is the default for IPv4 WANs.
SmartRG Inc., an Adtran company. Proprietary and Confidential. All Rights Reserved. © 2020
> Ethernet WAN in the left menu, the Ethernet WAN page appears with the
is enabled. To disable the Internet feature, click the
field, select the type of tagging that should be performed. Options are Untagged, Tagged, and
VLAN
CVID field also appears. Enter the Customer VLAN ID or the first in a range of CVIDs that
field, enter the MAC address to be used with this configuration. By default, this value is the
IPv4 Configuration and IPv6 Configuration
field, select the appropriate method for your WAN.
Pending changes... dialog box to save your settings.
and P-bit fields appear. Enter the ID of the appropriate VLAN. Valid
sections as they apply to your environment, using the
Internet settings
slide button to the right of Enabled.
17