ADTRAN SMART/RG SR905ac User Manual page 63

2. Fill in the fields, using the information in the following table. The same fields are used for both 2.4 GHz and 5 GHz
configurations.
3. Click the Apply button in the
Field Name Description
Enabled Each radio is enabled by default. To disable a radio, click the
TX Power
Select the maximum rate at which transmission is allowed. Options range from 15 dBm (31 mw) to 30 dBm
(1000 mw). The default is 24 dBm (251 mW) for the 2.4GHz radio and 22 dBm (158 mW) for the 5 GHz
radio.
Bandwidth Mode
2.4 GHz radio: Select the "high throughput" (HT) bandwidth mode for this device. Options are HT20 and
HT40 (MHz). The default is HT20.
5 GHz radio: Select the "very high throughput" (VHT) bandwidth mode for this device. Options are VHT20,
VHT40, and VHT80. The default is VHT80.
Enable Legacy Rates This feature is disabled by default. To set the gateway to cut transmission briefly when changing channels,
click the
new channel.
SmartRG Inc., an Adtran company. Proprietary and Confidential. All Rights Reserved. © 2020
Pending changes... dialog box to save your settings.
slide button. This is useful for legacy WiFi clients, enabling them to connect more effectively to a
slide button.
63