Reboot - ADTRAN SMART/RG SR905ac User Manual

1. In the left menu, click
2. To configure how this gateway should operate, in the
Router and Wireless Access Point. The default is Router.
In Router mode, this device functions as a router between your ISP's WAN and your home network LAN. It provides firewall,
NAT server, DHCP server, UPnP, DDNS, Cloud File Sharing and other services. Select this option if you do not currently have a
router.
Warning: When you change this setting, a Warning message appears, stating that the gateway will reboot upon applying this
setting.
3. To configure this gateway as part of a mesh network, in the
None, Intellifi Controller and Satellite. Satellite is only available when you select Wireless Access Point in the
Mode field. The default setting is Intellifi Controller.
In Intellifi Controller mode, this device also becomes the central control center for your Intellifi network. Select this option
if you are deploying Intellifi mesh nodes to support WiFi coverage at this location.
4. The Intellifi Mode Auto switch
Intellifi Controller mode to the managed Satellite mode, click the
To learn more about Intellifi network configuration, refer to the
article available in the ADTRAN Support Community.
5. Click the Apply button in the

Reboot

On this page, you can reboot your device.
1. In the left menu, click
connected is shown in the
SmartRG Inc., an Adtran company. Proprietary and Confidential. All Rights Reserved. © 2020
Admin > Operating Mode. The following page appears.
feature is enabled by default. To prevent the gateway from automatically switching from the
Pending changes... dialog box to save your settings.
Admin > Reboot. The following screen appears. The amount of time that the gateway has been
Uptime line below the Start reboot
Operating Mode field, select the appropriate setting. Options are
Intellifi Mode field, select the appropriate setting. Options are
slide button.
"How to set up an Intellifi mesh network (SR400ac)" How-To
button.
Operating
107