Cd-Rom Drive - HP Compaq SP700 User Manual

CD-ROM Drive

To remove the CD-ROM drive:
1. Perform the service preparations shown on page 3-2.
2. Remove the following components:
side access panel
front bezel
Remove the two screws securing the right side of the CD-ROM drive 1.
3.
Slide the CD-ROM drive slightly out of the drive cage 2.
4.
Disconnect all cables from the rear of the CD-ROM drive 3.
5.
1
Figure 3-19.
2
Disconnecting the cables from the CD-ROM drive
COM PAC T
3
Compaq Professional Workstation SP700 Maintenance and Service Guide
3-23