HP Compaq SP700 User Manual page 21

Bay Bay Width
1
3.5-inch bay
2
3.5-inch bay
3
3.5-inch bay
4
5.25-inch bay
5
5.25-inch bay
6
5.25-inch bay
7
3.5-inch bay
CAUTION: If a drive is not installed in bays 5 or 6 or if the bays are empty, be sure
an EMI/cooling shield is installed to ensure proper airflow and cooling.
Table 3-2
Drive Positions
Bay Height Device Configurations
Third-Height Part of the removable hard drive cage. Supports a 1.0-inch
hard drive or a 1.6-inch hard drive.
Third-Height Part of the removable hard drive cage. Supports a 1.0-inch
hard drive. Bay 2 is not available when a 1.6-inch hard drive
is installed in either bay 1 or bay 3.
Third-Height Part of the removable hard drive cage. Supports a 1.0-inch
hard drive or a 1.6-inch hard drive.
Half-Height A CD-ROM drive is shipped in bay 4.
Half-Height Supports 1.0-inch or a 1.6-inch storage devices. An optional
hard drive, diskette drive, CD-ROM drive, or tape drive can
be installed in bay 5.
Half-Height Supports 1.0-inch or a 1.6-inch storage devices. An optional
hard drive, diskette drive, CD-ROM drive, or tape drive can
be installed in bay 6.
Third-Height Supports a 1.0-inch storage device. A standard 3.5-inch
diskette drive is shipped in bay 7.
Compaq Professional Workstation SP700 Maintenance and Service Guide
3-21