Chapter 1 Introduction; Product Specifications - CHAINTECH 7AIV2 Manual

Table of Contents

Advertisement

1-1 Product Specifications

Processor
- Supports AMD Socket A processors up to 1.2GHz
- 100MHz DDR (Double Data Rate) transfer on K7 CPU address and data buses
- High efficiency switching power modules up to 40A
 Chipset
- VIA Apollo KT133 (VT8363 or VT8363E/686A) or (VT8363 or VT8363E/
686B support ATA 100) two chip AGPset
DRAM Memory
- Two 3.3V 168-pin DIMM sockets support up to 1GB
- Supports PC-100, PC-133 SDRAM, and VCM
 Expansion Slots
- Four 32-bit PCI slots (Rev 2.2 compliant)
 2Mb Boot-Block Flash ROM
- Award System BIOS, supports PnP, APM, DMI,ACPI & Multi-device
booting features i.e. floppy, LS120, CD-ROM, HDD(IDE, SCSI), ZIP-ATAPI
etc.
- Includes Trend ChipAway Virus protection for virus-free boot and virus
free operating system
- BIOS Wonder technology including ChipAway Virus, Flash BIOS Write Protect,
Embedded Flash Utility, Built-in Hard Disk Backup firmware
Embedded Ultra DMA PCI IDE controller
- Supports two IDE ports up to 4 ATAPI devices
- Supports up to PIO Mode 4 up to 16.6MBps, Multi-Word Mode 4 up to
66MBps with bus mastering
- Bus Master software drivers for all common multi-task operating systems
- Optional VIA 686B ATA-100 support up to Multi Word Mode 5
Embedded Super I/O Functions
- Two UARTs support two serial ports and IR function for HPSIR and ASKIR
- One parallel supports SPP/ECP/EPP
- One floppy disk drive connector supports up to 2.88MB, Japanese 3- Mode
and 1Mbps transfer rate
- Supports Game/MIDI port for soft-audio
Chapter 1
Introduction
Introduction
1

Advertisement

Table of Contents
loading

Table of Contents