CHAINTECH 7AIV2 Manual page 50

VIA686B Driver Installation Instruction
Please note that when you installed the VIA service pack driver and then reboot your
system, the file Digital.inf on AGP VxD Disk is missing. Please follow the instruction
below to finish the installation process.
1. You will be prompt to insert the "AGP VxD Disk"(Figure 1-1). Click "OK".
2. After clicking "OK", you will be prompt that the file Digital.inf on AGP VxD Disk
can not be found (See figure 1-2 below). Click on the "Skip File" to finish
Installation.
Note: The Digital.inf file was not included in this service pack was due to the fact
that Microsoft Digital Logo Certificate is not yet issue to VIA prior to the
release of this mainboard.
P/N:9410-050-031
October 13, 2000
Figure 1-1
Figure 1-2
Code:7CTAIV2.3_E Amend.1
VIA686B Driver Installation Instruction
Please note that when you installed the VIA service pack driver and then reboot your
system, the file Digital.inf on AGP VxD Disk is missing. Please follow the instruction
below to finish the installation process.
1. You will be prompt to insert the "AGP VxD Disk"(Figure 1-1). Click "OK".
2. After clicking "OK", you will be prompt that the file Digital.inf on AGP VxD Disk
can not be found (See figure 1-2 below). Click on the "Skip File" to finish
Installation.
Note: The Digital.inf file was not included in this service pack was due to the fact
that Microsoft Digital Logo Certificate is not yet issue to VIA prior to the
release of this mainboard.
P/N:9410-050-031
October 13, 2000
Figure 1-1
Figure 1-2
Code: 7CTAIV2.3_E Amend.1