Shuttle MS52P User Manual
  1. Manuals
  2. Brands
  3. Shuttle Manuals
  4. Motherboard
  5. MS52P
  6. User manual

Shuttle MS52P User Manual

Pentium 4 processor based ddr main board
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MS52P/MS52PN
Pentium 4
Processor
Based DDR MAIN BOARD
User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MS52P and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Shuttle MS52P

Summary of Contents for Shuttle MS52P

  • Page 1 MS52P/MS52PN Pentium 4 Processor Based DDR MAIN BOARD User's Manual...
  • Page 2 The information contained in this manual is provided for general use by the customers. Trademarks Shuttle is a registered trademark of Shuttle Inc. Intel, Pentium is a registered trademarks of Intel Corporation. SiS is a registered trademarks of SiS Corporation.
  • Page 3 Statement of Shuttle Mainboard via the EMI Test Shuttle mainboards have been via the EMI test in terms of series of regulations: EN55022/ CISPR22/AS/NZS3548 Class B, EN55024 (1998/AS/NZS), EN4252.1 (1994), EN61000, ANSI C63.4 (1992), CFR47 Part 15 Subpart B, and CNS13438 (1997). The items tested are illus- trated as follows: (A) Voltage: AC 110V/60HZ &...
  • Page 4 (D) Supported Host Peripherals: Host Peripheral Product Name Model Name FCC ID Case KF45A Power Supply (300W) ENP-0730 (ATX12V) 1000002885 IBM HDD (30.7GB) 91024UB YKFY7981 3892I168 MITSUMI FDD D353M SONY VCD Player CDU4811 3892A291 AGP Card Winfast Geforce 2 MX 3892C520 Power Cable Detachable and Shielded...

  • Page 5: Table Of Contents

    2.1 SPECIFICATIONS ..................8 3 HARDWARE INSTALLATION ...............11 3.1 STEP BY STEP INSTALLATION ................11 Accessories of MS52P/MS52PN ..............11 STEP 1 CPU Installation ................ 12 STEP 2 Set Jumpers ................14 STEP 3 Install DDR SDRAM System Memory ........14 STEP 4 Install Peripherals in System Case ..........
  • Page 6 3.2 JUMPER SETTINGS ................. 24 JUMPERS & CONNECTORS GUIDE ............ 25 Jumpers Clear CMOS Setting (JP1) ..............28 BIOS Write Protection (JP3) ..............28 Back-Panel Connectors PS/2 Keyboard & PS/2 Mouse Connectors ..........29 COM1 Port Connector ................29 Parallel Port Connector ................29 Line-out port connector .................
  • Page 7 Wake-on-Modem connector (WOM1) ............. 36 Wake-on-Lan connector (WOL1) ............36 Cooling Fan Connectors for CPU (CPUFAN1), Case (CASFAN1/ PWRFAN1) ................... 36 IR header (IR1) ..................37 3.3 SYSTEM MEMORY CONFIGURATION ............. 38 1. INSTALL MEMORY ................38 2. UPGRADE MEMORY ................ 38 4 SOFTWARE UTILITY ..............
  • Page 8 PC HEALTH STATUS ................70 FREQUENCY/VOLTAGE CONTROL ............71 LOAD FAIL-SAFE DEFAULTS ..............72 LOAD OPTIMIZED DEFAULTS ..............72 SET PASSWORD ..................73 SAVE & EXIT SETUP ................74 EXIT WITHOUT SAVING ................74 - 4 -...

  • Page 9: What's In The Manual

    WHAT’ S IN THE MANUAL Quick Reference Hardware Installation >> Step-by-Step ..........Page 11 Jumper Settings >> A Closer Look ............Page 25 Drivers/Software Utilities >> How to Install .......... Page 39 BIOS Setup >> How to Configure ............Page 47 About This Manual For First-Time DIY System Builder ............

  • Page 10: Introduction

    Micro ATX board. This manual adopted in MS52P and MS52PN mainboards at the same time. The differencen between MS52P and MS52PN equips with onboard LAN Controller. In the manual, if there are some standards, characters, equipment or software only appeared or adopted by MS52PN;...

  • Page 11: Item Checklist

    1.2 Item Checklist: Check all items with your MS52P/MS52PN mainboard to make sure nothing is missing. The complete package should include: - One piece of Shuttle PSKBM1 PSKBM1 CPU FAN1 A M P A M P COM1 COM1 LED1 MS52P/MS52PN Mainboard...

  • Page 12: Features

    2 FEATURES MS52P/MS52PN mainboard is carefully designed for the demanding PC user who wants high performance and maximum intelligent features in a compact package. 2.1 Specifications - CPU Support Intel Pentium 4/Celeron/Hyper Threading, 478-pin processors with 400 / 533MHz FSB.
  • Page 13 - I/O Interface Provides a variety of I/O interfaces: Ø 1 PS/2 mouse connector Ø 1 PS/2 keyboard connector Ø 1 serial port. Ø 1 VGA port. Ø 1 parallel port.. Ø 1 MIDI/GAME port. Ø 2 USB ports. Ø 1 LAN port.(MS52PN only) Ø...
  • Page 14 - Form Factor System board conforms to Micro ATX specification. Board dimension: 244mm x244mm. - Advanced Features Ø Low EMI - Built in spread spectrum and automatic clock shut-off of unused PCI/SDRAMS slots to reduce EMI. Ø Dual Function Power Button - The system can be in one of two states, one is Suspend mode and the other is Soft-Off mode.

  • Page 15: Hardware Installation

    Then follow these steps designed to guide you through a quick and correct installation of your system. 3.1 Step-by-Step Installation Accessories Of MS52P/MS52PN CPU Fan Connector-CPUFAN1 Two DDR DIMM Slots Socket 478...

  • Page 16: Step 1 Cpu Installation

    Step 1 CPU Installation: This mainboard supports Intel Pentium 4/Celeron , Socket 478 series CPU. Please follow the step as below to finish CPU installation. Be careful of CPU orientation when you plug it into CPU socket. 1. Pull up the CPU socket lever and up to 90-degree angle. CPU socket lever up to 90 degree 2.
  • Page 17 3. Press down the CPU socket lever and finish CPU installation. Note: If you do not match the CPU socket Pin 1 and CPU cut edge well, it may damage the CPU. 4. The Intel Pentium4/Celeron processor requires a set of heatsink/fan to ensure proper cooling of the processor.

  • Page 18: Step 2 Set Jumpers

    Step 2. Set Jumpers The default jumper settings have been set for the common usage standard of this mainboard. Therefore, you do not need to reset the jumpers unless you require special adjustments as any of the following cases: 1. Clear CMOS 2.

  • Page 19: Step 4 Install Peripherals In System Case

    Step 4 Install Internal Peripherals in System Case Before you install and connect the mainboard into your system case, we recommend that you first assemble all the internal peripheral devices into the computer housing, including but not limited to the hard disk drive (IDE/ HDD), floppy disk drive (FDD), CD-ROM drive, and ATX power supply unit.

  • Page 20: Step 5 Mount The Mainboard On The Computer Chassis

    Step 5 Mount the Mainboard on the Computer Chassis 1. You may find that there are a lot of different mounting hole positions both on your computer chassis and on the mainboard. To choose correct mounting holes, the key point is to keep the back-panel of the mainboard in a close fit with your system case, as shown below.

  • Page 21: Step 6 Connect Front Panel Switches/Leds/Speaker/Usb

    Step 6 Connect Front Panel Switches/LEDs/Speaker/USB You can find there are several different cables already existing in the system case and originating from the computer front-panel devices (HDD LED, Power LED, Reset Switch, PC Speaker, or USB devices etc.) These cables serve to connect the front-panel switches, LEDs, and USB connectors to the mainboard front-panel connectors group ( USB2/USB3 and PANEL1, SPEAKER1,AUDIO1), as shown below.

  • Page 22: Step 7 Connect Ide And Floppy Disk Drives

    Step 7 Connect IDE and Floppy Disk Drives 1. IDE cable connector IDE2 IDE1 2. Floppy cable connector FDD1 Step 8 Connect Other Internal Peripherals 1. CDIN1/CDIN2 connectors CDIN1 CDIN2 - 18 -...

  • Page 23: Step 9 Connect The Power Supply

    2.IR header 4. Wake On LAN and Wake On Modem headers WOM1 WOL1 Step 9 ATX1 Connect the Power Supply 1. System power connector ATX2 - 19 -...

  • Page 24: Step 10 Install Add-On Cards In Expansion Slots

    Step 10 Install Add-on Cards in Expansion Slots 1. AGP Card 2. PCI Card 3. CNR Card - 20 -...

  • Page 25: Step 11 Connect External Peripherals To Back Panel

    Step 11 Connect External Peripherals to Back-Panel You are now ready to put the computer case back together and get on to the external peripherals connections to your system's back-panel. PSKBM1 A M P A M P COM1 VGA1 1. PS/2 Mouse and PS/2 Keyboard 2.

  • Page 26: Step 12 First Time System Boot Up

    Step 12 First Time System Boot Up To assure the completeness and correctness of your system installation, you may check the above installation steps once again before you boot up your system for the first time. 1. Insert a bootable system floppy disk (DOS 6.2x, Windows 95/98/NT, or others) which contains FDISK and FORMAT utilities into the FDD.

  • Page 27: Step 13 Install Drivers & Software Components

    Please note that all the system utilities and drivers are designed for Win 9x/ 2000/ME/XP/NT operating systems only. Make sure your operating system is already installed before running the drivers installation CD-ROM programs. 1. Insert the MS52P/MS52PN bundled CD-ROM into your CD-ROM drive. The autorun program will display the drivers main installation window on screen.

  • Page 28: Jumper Settings

    3.2 Jumper Settings Several hardware settings are made through the use of mini jumpers to con- nect jumper pins on the mainboard. Pin #1 could be located at any corner of each jumper, you just find the location with a white right angle which stands for pin 1#.

  • Page 29: Jumpers & Connectors Guide

    Jumpers & Connectors Guide Use the mainboard layout on page 11 to locate CPU socket, memory banks, expansion slots, jumpers and connectors on the mainboard during the installation. The following list will help you to identify jumpers, slots, and connectors along with their assigned functions: B1~B2 B3~B5 B6~B9...

  • Page 30: Jumpers

    Jumpers : Clear CMOS setting : BIOS Write Protection setting Back Panel Connectors PSKBM1 : PS/2 keyboard port PSKBM1 : PS/2 mouse port COM1 : Serial port VGA1 : VGA port LPT1 : Parallel port LINE_OUT : Line-Out port LINE_IN : Line-In port MIC_IN : Mic-In port...
  • Page 31 Other Connectors ATX1 : ATX 12V power connector ATX2 : ATX power connector CDIN1/CDIN2 : Primary/ Secondary CD_IN connectors WOM1 : Wake On Modem wakeup connector WOL1 : Wake On LAN wakeup connector CPUFAN1 : CPU fan connector CASFAN1 : Case fan connector 1 PWRFAN1 : Case fan connector 2 : Infrared header...

  • Page 32: Clear Cmos Setting (Jp1)

    Jumpers Clear CMOS Setting (JP1) JP1 is used to clear CMOS data. Clearing CMOS will result in the perma- nently erasing previous system configuration settings and the restoring origi- nal (factory-set) system settings. Pin 1-2 (Normal) Pin 2-3 (Clear CMOS) Step 1.

  • Page 33: Back-Panel Connectors

    Back-Panel Connectors PS/2 Keyboard & PS/2 Mouse Connectors B1~B2 Two 6-pin female PS/2 keyboard & Mouse connectors are located at the rear panel of the PS/2 Mouse mainboard. Depending on the computer housing you use (desktop or tower), the PS/2 Mouse connector is situated at the top of the PS/ 2 Keyboard connector when the mainboard is laid into a desktop, as opposed...

  • Page 34: Line-In Port Connector

    Line-In Port Connector Line-In is a stereo line-level input port that accepts a 1/8-inch TRS stereo plug. It can be used as a source for digital sound recording, a source to be mixed with the output, or both. Line-In Port Mic-In Port Connector Mic-In is a 1/8-inch jack that provides a mono input.

  • Page 35: Front-Panel Connectors Atx Power On/Off Switch Connector (Pwrsw)

    Front-Panel Connectors ATX Power On/Off Switch Connector (PWRSW) The Power On/ Off Switch is a momentary-type switch used for turning on or off the system's ATX power supply. Attach the connector cable from the Power Switch to the 2-pin Power Switch header on the mainboard. PANEL1 Green LED Connector (GRN LED) The Green LED (GRN LED) indicates that the system is currently in one of the...

  • Page 36: Hardware Reset Connector (Rst)

    Hardware Reset Connector (RST) Attach the 2-pin hardware reset switch cable to the Reset Switch header. Press- ing the reset switch causes the system to restart. PANEL1 Speaker Connector (SPEAKER1) Attach the PC speaker cable from the case to the 4-pin speaker connector (SPEAKER1).

  • Page 37: Extended Usb Headers (Usb2/3)

    Extended USB Headers (USB2/USB3) The headers are used to connect the cable attached to USB connectors which are mounted on front panel or back panel. But the USB cable is op- tional at the time of purchase. USB2 USB3 Pins Assignment: 1=VREG_FP_USBPWR0 2=VREG_FP_USBPWR0 3=USB_FP_P0-...

  • Page 38: Internal Peripherals Connectors

    Internal Peripherals Connectors Enhanced IDE and Floppy Connectors The mainboard features two 40-pin dual-channel IDE device connectors (IDE1/IDE2) providing support for up to four IDE devices, such as CD-ROM and Hard Disk Drives (H.D.D.). This mainboard also includes one 34-pin floppy disk controller (FLOPPY1) to accommodate the Floppy Disk Drive (FDD).

  • Page 39: Other Connectors

    Other Connectors ATX Power Supply Connectors (ATX1/ATX2) This motherboard uses 20-pin Pentium 4 standard ATX power header, ATX2 and comes with another header ATX1. ATX1 is with 2x2-pin +12 V PC ATX power supply header. Please make sure you plug in the right direction.

  • Page 40: Wake-On-Modem Connector (Wom1)

    Wake-On-Modem Connector (WOM1) Attach a 3-pin connector through the Modem card which supports the Wake- On-Modem (WOM1) function. This function lets users wake up the connected system through the Modem card. Pins Assignment: 1=5VSB 2=GND 3=Ring# WOM1 Wake-On-LAN Connector (WOL1) Attach a 3-pin connector through the LAN card which supports the Wake-On- LAN (WOL1) function.

  • Page 41: Ir Header (Ir1)

    IR Header (IR1) If you have an Infrared device, this mainboard can implement IR transfer function. To enable the IR transfer function, follow these steps: Pins Assignment: 1=Not assigned 2=KEY 3=+5V 4=GND 5=IRTX 6=IRRX Note: Before connect your IR device, please be sure each IR on board pin allocation is matchable with the pin of the IR device.

  • Page 42: System Memory Configuration

    3.3 System Memory Configuration The MS52P/MS52PN mainboard has two 184-pin DIMM slots that allow you to install from 128MB up to 2GB of system memory. Each 184-pin DIMM (Dual In-line Memory Module) Slot can accommodate , 128MB, 256MB, 512MB, and 1GB of PC1600/PC2100/PC2700 compliant 2.5V single (1 Bank) or double (2 Bank) side 64-bit wide data path DDR...

  • Page 43: Software Utility

    Audio, USB2.0 drivers. F Install Mainboard MS52PN Software - Installing VGA, SIS AGP, Audio, LAN and USB2.0 drivers. F Manual - MS52P & MS52PN Series mainboard user's manual in PDF format. F Link to Shuttle Homepage - Link to shuttle website homepage.

  • Page 44: Install Mainboard Software

    Insert the attached CD into your CD-ROM drive and the CD AutoRun screen should appear. If the AutoRun screen does not appear, double click on Autorun icon in My Computer to bring up Shuttle Mainboard Software Setup screen. Select using your pointing device (e.g. mouse) on the "Install Mainboard MS52P Software"...

  • Page 45: Install Vga Device Driver

    4.3 Install VGA Device Driver Select using your pointing device (e.g. mouse) on the “Install VGA Device Driver" bar to install VGA driver. MS52P MS52PN Once you made your selection, a Setup window run the installation automatically. When the copying files is done, make sure you reboot the system to take the installation effect.

  • Page 46: Install Sis Agp Driver

    4.4 Install SiS AGP Driver Select using your pointing device (e.g. mouse) on the “Install SiS AGP Driver " bar to install SiS AGP Driver. MS52P MS52PN Once you made your selection, a Setup window run the installation automatically. When the copying files is done, make sure you reboot the system to take the installation effect.

  • Page 47: Install Audio Device Driver

    4.5 Install Audio Device Driver Select using your pointing device (e.g. mouse) on the “Install Audio De- vice Driver" bar to install Audio Device driver. MS52P MS52PN Once you made your selection, a Setup window run the installation automatically. When the copying files is done, make sure you reboot the system to take the installation effect.

  • Page 48: Install Lan Driver(Ms52Pn Only)

    4.6 Install LAN Driver (MS52PN only) Select using your pointing device (e.g. mouse) on the “Install LAN Driver” bar to install LAN driver. Once you made your selection, a Setup window run the installation automatically. When the copying files is done, make sure you reboot the system to take the installation effect.

  • Page 49: Install Usb2.0 Driver

    4.7 Install USB2.0 Driver Select using your pointing device (e.g.mouse) on the "Install USB Driver" bar to install USB 2.0 driver. MS52P MS52PN Once you made your selection, a setup window run the installation automatically. When the copying file is done, make sure your reboot the system to take the installation effect.

  • Page 50: View The User's Manual

    Select using your pointing device (e.g.mouse) on the "manaul" bar. Then Online Information windows will appear on your screen. Click on the " Install Acrobat Reader " bar if you need to install acrobe reader. Then click on " MS52P/MS52PN Manual" bar to view user's manual. - 46 -...

  • Page 51: Bios Setup

    5 BIOS SETUP MS52P/MS52PN BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration. This information is stored in battery- backed RAM so that it retains the Setup information even if the system power is turned off.

  • Page 52: The Main Menu

    5.2 The Main Menu Once you enter the AwardBIOS(tm) CMOS Setup Utility, the Main Menu will appear on the screen. The Main Menu allows you to select from several setup functions and two exit choices. Use the arrow keys to select among the items and press <Enter> to accept and enter the sub-menu.
  • Page 53 PnP / PCI Configurations This entry appears if your system supports PnP / PCI. PC Health Status This entry shows the current system temperature, Voltage, and FAN speed. Frequency/Voltage Control Use this menu to specify your settings for frequency/voltage control. Load Fail-Safe Defaults Use this menu to load the BIOS default values for the minimal/stable performance of your system to operate.

  • Page 54: Standard Cmos Features

    Standard CMOS Features The items in Standard CMOS Setup Menu are divided into 10 categories. Each category includes no, one or more than one setup items. Use the arrow keys to highlight the item and then use the <PgUp> or <PgDn> keys to select the value you want in each item. Date <Month>...
  • Page 55 IDE Secondary Slave Options are in its sub menu. Press <Enter> to enter the sub-menu of detailed options. Drive A/Drive B Select the type of floppy disk drive installed in your system. Ø The choice: None, 360K, 5.25 in, 1.2M, 5.25 in, 720K, 3.5 in, 1.44M, 3.5 in, or 2.88M, 3.5 in.
  • Page 56 IDE Primary Master Selecting 'manual' lets you set the remaining fields on this screen and select the type of fixed disk. "User Type" will let you select the number of cylinders, heads, etc., Note: PRECOMP=65535 means NONE ! Ø The choice: None, Auto, or Manual. Access Mode Choose the access mode for this hard disk.

  • Page 57: Advanced Bios Features

    Advanced BIOS Features This section allows you to configure your system for basic operation. You have the opportunity to select the system's default speed, boot-up sequence, keyboard operation, shadowing, and security. Virus Warning Allows you to choose the VIRUS Warning feature for IDE Hard Disk boot sector protection.
  • Page 58 Hyper-Threading Technology This item allows you to enable or disable CPU Hyper-Threading function. If it is set to enable, the CPU performance will better. Ø The choice: Enabled, or Disabled. Quick Power On Self Test This item speeds up Power-On Self Test (POST) after you power on the computer.
  • Page 59 ATA 66/100 Cable MSG This item enables or disables the display of the ATA 66/100 Cable MSG. Ø The choice: Enabled, Disabled. Typematic Rate Setting Keystrokes repeat at a rate determined by the keyboard controller. When this controller enabled, the typematic rate and typematic delay can be selected.
  • Page 60 HDD S.M.A.R.T. Capability This item enable/disable the HDD system management function. Ø The choice: Enabled or Disabled. Report No FDD For Win 95 Whether report no FDD runs for Win 95 or not. Ø The choice: Yes or No. Small Logo(EPA) Show This item allows you to enable/disable the EPA Logo.

  • Page 61: Advanced Chipset Features

    Advanced Chipset Features This section allows you to configure the system based on the specific features of the installed chipset. This chipset manages bus speeds and access to sys- tem memory resources, such as DRAM and the external cache. It also coor- dinates communications between the conventional ISA bus and the PCI bus.
  • Page 62 Prefetch Caching This item enable/disable the Prefetch cache function of DRAM controller Ø The Choice: Enabled or Disabled. Memory Hole at 15M-16M You can reserve this area of system memory for ISA adapter ROM. When this area is reserved, it cannot be cached. The user information of peripherals that need to use this area of system memory ususlly discusses their memory requirements.

  • Page 63: Integrated Peripherals

    Integrated Peripherals SIS OnChip IDE Device Options are in its sub-menu. Press <Enter> to enter the sub-menu of detailed options. Internal PCI/IDE This chipset contains and internal PCI IDE interface with support for two IDE channels. Ø The choice: Disabled, Primary, Secondary, or Both. IDE Primary/Secondary Master/Slave PIO The four IDE PIO (Programmed Input/Output) fields let you set a PIO mode (0-4) for each of the four IDE devices that the onboard IDE inter-...
  • Page 64 IDE DMA transfer access lnternal PCI/IDE field, above, is Disabled. Ø The choice: Enabled or Disabled. IDE Burst Mode Selecting Enabled reduces latency between each drive read/write cycle, but may cause instability in IDE subsystems that cannot support such fast performance. If you are getting disk drive errors, try setting this value to Disabled.
  • Page 65 UART Mode Select This item allows you to select which mode for the Onboard Serial Port. Ø The choice: Normal,or IrDA. UR2 Duplex Mode This item allows you to selects the IR half/full duplex function. Ø The choice: Full or Half. Onboard Parallel Port This item allows you to determine onboard parallel port controller I/O address setting.
  • Page 66 USB 2.0 support Select Enabled if your system contains a Universal Serial Bus2.0 con- troller and you have USB peripherals. Ø The Choice: Enabled or Disabled. USB Keyboard Support This item is used to defined USB Keyboard id Enabled or Disabled. Ø...
  • Page 67 USB0/USB1/USB2/USB2.0 Access Interface This option determines whether the USB0/USB1/USB2/USB2.0 access interface is the embedded bus or a PCI bus. Ø The choice: EDB Bus, or PCI Bus. Audio Access Interface This option determines whether the audio access interface is the embed- ded bus or a PCI bus.

  • Page 68: Power Management Setup

    Power Management Setup The Power Management Setup allows you to configure your system to most effectively saving energy while operating in a manner consistent with your own style of computer use. ACPI Function This item allows you to enable/disable the Advanced Configuration and Power Management (ACPI) Ø...
  • Page 69 Video Off Method This determines the manner in which the monitor is blanked. Blank Screened This option only writes blanks to the video buffer. V/H SYNC+Blank This selection will cause the system to turn off the vertical and horizontal synchronization ports and write blanks to the video buffer.
  • Page 70 IRQ 8 Break Suspend This field allows you to enable or disable monitoring of IRQ8 so that it does not awaken the system from a suspend mode. Ø The choice: Enabled, Disabled. RING/WOL/WOM PowerUp Control This item enabled/disabled LAN or modem activity to wakeup the system from a power saving mode.
  • Page 71 Time (hh : mm : ss) Alarm This item selects the alarm Time. [hh] Ø Key in a DEC number:Min=0, Max=23. [mm/ss] Ø Key in a DEC number:Min=0, Max=59. Delay prior to Thermal This sets the delay time before the CPU enters auto thermal mode. Ø...

  • Page 72: Pnp/Pci Configuration

    PnP/PCI Configurations This section describes the configuration of PCI bus system. PCI or Personal Computer Interconnection is a system which allows I/O devices to operate at the speed CPU itself keeps when CPU communicating with its own special components. This section covers some very technical items, and it is strongly recommended that only experienced users should make any changes to the default settings.
  • Page 73 IRQ Resources When resources are controlled manually, assign each system interrupt a type, depending on the type of device using the interrupt. IRQ3/4/5/7/9/10/11/12/14/15 assigned This item allows you to determine the IRQ assigned to the ISA bus and is not available to any PCI slot. Legacy ISA for devices is compliant with the original PC AT bus specification;...

  • Page 74: Pc Health Status

    PC Health Status Shutdown Temperature Enables you to set the maximum temperature the system can reach before powering down. Ø The choice: Disabled, 60 C/140 F,65 C/149 F,70 C/158 System Component Characteristics These fields provide you with information about the systems current operating status.

  • Page 75: Frequency/Voltage Control

    Frequency/Voltage Control CPU Clock Ratio This item allows you to adjust CPU Ratio. Min: 8 Max: 50 Ø Key in a DEC number: (Between Min and Max.) or left it auto detect. Auto Detect DIMM/PCI Clk This item allows you to enable/disable auto detection DIMM/PCI Clock. Ø...

  • Page 76: Load Fail-Safe Defaults

    Load Fail-Safe Defaults When you press <Enter> on this item, you will get a confirmation dialog box with a message similar to: Load Fail-Safe Defaults (Y/N) ? N Pressing 'Y' loads the BIOS default values for the most stable, minimal performance system operations. Load Optimized Defaults When you press <Enter>...

  • Page 77: Set Password

    Set Password This item is to set supervisor password. Please follow below steps. New Password Setting : 1. While pressing <Enter> key to start setting password function, a dialog box appears to ask you “Enter password: “. 2. Key in a new password now. However, the password can not be over eight characters or numbers.

  • Page 78: Save & Exit Setup

    Save & Exit Setup Pressing <Enter> on this item asks for confirmation: Save to CMOS and EXIT (Y/N)? Y Pressing "Y" stores the selections made in the menus of CMOS - a special section of memory that stays on after you turn your system off. The next time you boot your computer, the BIOS configures your system according to the Setup selections stored in CMOS.

This manual is also suitable for:

Ms52pn

Table of Contents