Shrinking An Image To Fit The Page - Canon MultiPASS F50 User Manual

F50 Chapter 6-33.qxd
MultiPASS F50 User's Manual
Start copying
4
Press
will display number of copies remaining.
To set copy ratios manually:
1 Load document
Place document(s) to be copied either
directly on the platen glass or into the ADF.
2 Select ENLARGE/REDUCE
Press
Set ratio
3
Use the numeric keypad to enter a
percentage, or press
percentage in 1% increments from 25%
(minimum) to 400% (maximum).
Press
Start copying
4
Press
remaining.

Shrinking an Image to Fit the Page

If the image to be copied is larger than the output paper, you can automatically
reduce the image to fit the page on which it will be copied.
To fit an image on a page:
Load document
1
Place document(s) to be copied either directly on the platen glass or into the ADF.
5 5 4 4
6/20/01 5:15 PM Page 54
to begin copying. The LCD panel
twice to access.
to select.
to begin copying. The LCD panel will display number of copies
COPY MODE MENUS
1. SPECIAL COPY
2. RECEIVE MODE
3. MEMORY REFERENCE
4. REPORTS/LISTS
5. TEL REGISTRATION
6. FAX SETTINGS
7. PRINTER SETTINGS
to enter a
8. SYSTEM SETTINGS
1. IMAGE REPEAT
2. MIRROR IMAGE
3. ENTIRE IMAGE
1. CLEANING
2. ALIGN PRINTHEAD
3. BOTTOM MARGIN
1. DISPLAY LANGUAGE
2. AUDIBLE TONES