Canon MultiPASS F50 User Manual page 10

F50 Chapter 1-33.qxd
MultiPASS F50 User's Manual
To load envelopes:
1 Open Scanning unit
Press the O O p p e e n n button on the side of
the F50 MFP, then lift the scanning
unit.
2 Set paper thickness lever
Adjust the paper thickness lever to the
right, then close the scanning unit until
it clicks into place.
Adjust paper guide
3
Pinch and slide the paper guide to the left.
Insert envelopes
4
Before loading, press the corners and
sides of the envelopes to make them
as flat as possible. Insert into the
paper tray, with the print side facing
up and aligned to the right.
Make sure that none of the envelope flaps overlap. If the envelope edges are
not flat, crease them with a pen.
Insert envelopes into the multi-purpose tray, with the address side facing up
and pointed in the direction shown. Align the stack with the right side of the
paper rest.
Readjust paper guide
5
Move the guide securely to the edge of
the envelopes.
Replace tray cover
6
Place the tray cover on the multi-
purpose tray when finished.
4 4
6/20/01 5:05 PM Page 4