Configuring Your Fax - Canon MultiPASS F50 User Manual

F50 Chapter 3-33.qxd
MultiPASS F50 User's Manual
For external
devices, such as
answering
machine, phone
or data modem
For phone line
If you use an external device with your F50 MFP, be sure to select the correct
receive mode for that device. (See "Setting the Fax Receive Mode" on page 14.)

Configuring Your Fax

There are specific steps you should take to configure your fax for optimum
performance:
• Select the mode you wish to use for receiving faxes
• Set up a distinctive ring pattern (if available from your phone company and in
use)
• Enter your sender information
• Ensure that your F50 MFP is set for the correct service (tone or pulse)
1 1 2 2
6/20/01 5:08 PM Page 12
Recommended Device Connections
Machine Only
Wall Jack
Machine and Telephone
Wall Jack
Machine and Answering Machine
Wall Jack
Machine, Answering Machine and Telephone
Wall Jack
Machine and PC Modem
Wall Jack
Receive Modes
FAX ONLY MODE
FAX/TEL AUTO SW
DRPD
MANUAL MODE
Telephone
ANS. MACHINE MODE
Answering
Machine
ANS. MACHINE MODE
Answering Telephone
Machine
FAX ONLY MODE
DRPD
PC